Research & Publications

Zeal TVC

2024-25

Sr. No.	Title of Paper	Name of the Author(s)	Name of Journal	Year of Publication	ISSN Number
1	Comparative review and experimental validation of Tribological and Mechanical Properties of Zinc Aluminium Alloy (ZA27) and Aluminium Zinc Alloy (Al-25Zn)	Dr. Parmeshwar P Ritapure	Journal of Alloys and Metallurgical Systems	2024-2025	2949-9178
2	Design and Validation of Holding Fixture for Auto-Rickshaw Silencer Based on FEM and FFT Analyzer	Prof. Gujar Shilpa Haridas	Journal of Harbin Engineering University	2024-2025	1006-7043

2023-24

Sr. No.	Title of Paper	Name of the Author(s)	Name of Journal	Year of Publication	ISSN Number
1	Comparative review and experimental validation of Tribological and Mechanical Properties of Zinc Aluminium Alloy (ZA27) and Aluminium Zinc Alloy (Al-25Zn)	Dr. Parmeshwar P Ritapure	Journal of Alloys and Metallurgical Systems	2024-2025	2949-9178
2	Design and Validation of Holding Fixture for Auto-Rickshaw Silencer Based on FEM and FFT Analyzer	Prof. Gujar Shilpa Haridas	Journal of Harbin Engineering University	2024-2025	1006-7043
3	Experimental investigation of heat transfer characteristics of inclined Aluminium two-phase closed thermosyphon	Dr. A. M. Kate	Kerntechnik	2023-2024	2195-8580
4	Heat transfer and pressure drop analysis of a microchannel heat sink using Nanofluids for energy applications	Dr. Pramod B Magade	Kerntechnik	2023-2024	2195-8580
5	Thermo-Hydraulic Analysis Of Fluid Flowing Through Circular Pipe With Wire Mesh Inserts Having Varying Mesh Porosity	Dr. P. N. Shrirao	IOP Conference Series: Earth and Environmental Science	2023-2024	1755-1315
6	Design of HVAC System using the Phenomena of Diurnal Temperature Fluctuation	Prof. V.P. Jagtap	IOP Conference Series: Earth and Environmental Science	2023-2024	1755-1315
7	Failure analysis steam turbine in sugar factory thermal power plant: A Review	Dr. H.P. Jagtap	IOP Conference Series: Earth and Environmental Science	2023-2024	1755-1315
8	A Case Study on Solid-Waste Management in Bilaspur City, Chhattisgarh, India	Dr. Amol Ubale	Madhya Bharti – Humanities and Social Sciences	2023-2024	0974-0066
9	Study on Increasing Energy Conversion Efficiency by Aerobic and Anaerobic Co-Digestion of Food Waste and Leachate	Dr. Amol Ubale	High Technology Letters	2023-2024	1006-6748
10	Dynamic Analysis Of Centrifugal Blower And Related Systems For Life Improvements Of Taper Roller Bearings	Ponkumar M	Journal of Analysis and Computation (JAC)	2023-2024	0973-2861
11	Prof. Sachin S. Borade	Technological Interventions In Jowar Harvesting Process	1st International Conference on Sustainable Energy Sources, Technologies and Systems 2023, Phagwara, India	2023-2024	Print ISSN: 1755-1307
12	Prof. A.R. Suryavanshi	Experimental Investigation of Performance of Diesel Engine Using Biodiesel	1st International Conference on Sustainable Energy Sources, Technologies and Systems 2023, Phagwara, India	2023-2024	Print ISSN: 1755-1307
13	Dr. Jagtap H. P.	Investigative Study on Thermally Conductive Electrical Insulators to Increase the Performance of MV Switchgear Equipment	International Conference on Materials for Emerging Technologies- 2021 (ICMET-21) February 18-19, 2022	2023-2024	0094-243X (print), 1551-7616 (web)
14	Prof. D.P. Kamble	Comparative Analysis of Heat Pipe with PCM, Cu Powder, and Fin for Thermal Enhancement	International Conference on Materials for Emerging Technologies	2023-2024	0094-243X (print), 1551-7616 (web)

2022-23

Sr. No.	Title of Paper	Name of the Author(s)	Name of Journal	Year of Publication	ISSN Number
1	Performance evaluation of heat transfer characteristics of heat exchanger in longitudinal fluid flow with serpentine tubes of constant pitch	Dr. P. N. Shrirao	Materials Today: Proceedings	2022-2023	ISSN: 2504-477X
2	CFD Analysis of heat transfer and flow behavior of fluid flowing over the straight and twisted square fin	Dr. P. N. Shrirao	Science, Technology And Development Journal	2022-2023	ISSN: 0950-0707
3	Performance Analysis of Plastic Injection Molding Using Particle Swarm Based Modified Sequential Quadratic Programming Algorithm Multi-objective Optimization Model	Prof. Ekta S Mehta	Journal of Theoretical and Applied Information Technology	2022-2023	2147-6799
4	Quality and Defect Prediction in Plastic Injection Molding using Machine Learning Algorithms based Gating Systems and its Mathematical Models	Prof. Ekta S Mehta	International Journal on Recent and Innovation Trends in Computing and Communication	2022-2023	2321-8169
5	An Experimental Study On Friction Stir Welding Of Aluminum-Magnesium Alloys For Improved Mechanical Properties Of Tailor Welded Blanks	Dr. Amol Ubale	3C Empresa Inve	2022-2023	2254-3376
6	Design, Development and Testing of Banana Fiber Extraction Machine	Dr. Pramod B Magade	Mathematical Statistician and Engineering Applications	2022-2023	2094-0343
7	Design, Analysis and Development of Rotary Rotor Bagasse Dryer for Smart Jaggery Plant	Dr. Pramod B Magade	International Journal of Mechanical Engineering	2022-2023	0974-5823
8	Analyzing emission characteristics of bio-fuel at varying mass fraction of nanoparticles	Prof. Pramod B Magade	Materials Today: Proceedings	2022-2023	ISSN: 2214-7853
9	Influence of nanomaterial coated condensing surface on the productivity of evacuated tube assisted solar still	Prof. Pramod B Magade	Materials Today: Proceedings	2022-2023	ISSN: 2214-7853
10	Energy Monitoring of Process Variables and Optimization of Nozzle Section in Sustainable Plastic Injection Molding	Prof. Ekta S Mehta	International Journal of Intelligent Systems and Applications in Engineering	2022-2023	2147-6799
11	Water Absorption and Thickness Swelling Behavior of Woven Roselle Fibre Epoxy Composites	Ayub A. Tamboli	International Journal of Vehicle Structures & Systems	2022-2023	ISSN: 0975-3060
12	Behavior of Composite Bolted Joint Under Tension-Shear and Compression-Shear Load Cases	Awadhani Lakshmana Vasantrao	International Review of Mechanical Engineering	2022-2023	ISSN: 1970-8734
13	Engine oil quality deterioration estimation using an integrated sensory system	Shinde Harish Mohan	Journal of Process Mechanical Engineering	2022-2023	ISSN: 09544089
14	Development of optimized maintenance program for a steam boiler system using reliability-centered maintenance approach	Patil Suyog Subhash	Sustainability	2022-2023	ISSN: 2071-1050
15	Evaluation Of Mechanical Properties Of Polypropylene Incorporating With Molybdenum di sulphide	Bangale Abhijit A.	Journal of Analysis and Computation	2022-2023	ISSN: 0973-2861
16	Structural Analysis Of 3600 Rotating Vehicle Chassis	Mr. Bhushan Sanjay More	Journal of Analysis and Computation (JAC)	2022-2023	ISSN: 0973-2861
17	Experimental And Analytical Study Of Head Impact Simulation For Automotive Display	Mr. Sampat N Pathare	Journal of Analysis and Computation (JAC)	2022-2023	ISSN: 0973-2861
18	Experimental and Analytical Study of Weld Distortion for Dumper Skip	Mr. Manoj Junawane	International Journal for Research in Engineering Application & Management (IJREAM)	2022-2023	ISSN: 2454-9150
19	Design, Development and Testing of Banana Fiber Extraction Machine	Mr. Prashant Shinde	Mathematical Statistician and Engineering Applications	2022-2023	ISSN: 2094-0343, 2326-9865
20	Dr. Pankaj Narayan Shrirao	Performance Evaluation of Heat Transfer Characteristics of Heat Exchanger in Longitudinal Fluid Flow with Serpentine Tubes of Constant Pitch	ICAME-22	2022-2023	Not Available
21	Pankaj Narayan Shrirao	Investigation of Heat Transfer Performance of Heat Exchanger in Longitudinal Fluid Flow with Serpentine Tubes of Constant Pitch	International Turkic World Congress on Science and Engineering	2022-2023	Not Available
22	Prof. Ekta S Mehta	Improved Water Evaporation Optimization for Warpage	AMMIE2024	2022-2023	Not Available
23	Prof. Ekta S Mehta	Simulation & Optimization of Warpage of Fiber Reinforced Using Human Behaviour-Based Optimization	ICAM-23	2022-2023	Not Available

2021-22

Sr. No.	Title of Paper	Name of the Author(s)	Name of Journal	Year of Publication	ISSN Number
1	Dr. P. P Ritapure	Optimization of dry sliding wear characteristics of Al-25Zn/SiC hybrid composites by graphite reinforcement using artificial neural network and Taguchi’s method	Tribology – Materials, Surfaces & Interfaces	2021-2022	Print ISSN: 1751-5831
2	Dr. P. P Ritapure	Influence of SiC on solid particle erosion and mechanical behavior of Al-25Zn alloy based novel metal matrix composites fabricated through stir casting technique	Advances in Materials and Processing Technologies	2021-2022	Print ISSN: 2374-068X
3	Dr. P. P Ritapure, Prof. Bharat D Aldar	Pin temperature and Al2O3 fillings effect on sliding wear characteristics of Al25Zn/ Al2O3 composites	Part J: Journal of Engineering Tribology	2021-2022	ISSN: 1350-6501
4	Dr. H. P. Jagtap, Prof. D.P. Kamble	An integrated approach for interoperability of standards, condition monitoring methods, and research models used in the power generation sector	IOP Conference Series: Materials Science and Engineering 1166 (1), 012010	2021-2022	Online ISSN: 1757-899X
5	Dr. Hanumant P. Jagtap	RAM analysis and availability optimization of thermal power plant water circulation system using PSO	Energy Reports Journal	2021-2022	ISSN 2352-4847
6	Prof. Godase S. M.	Succinate assisted synthesis of magnetically separable Fe2O3/g-C3N4 Nano-heterostructure: A stable catalyst for environmental remediation	Current Research in Green and Sustainable Chemistry	2021-2022	ISSN 2666-0865
7	Dr. A.M. Kate	The effect of Sr-doped zinc oxide Nano additives on the performance and emission parameters of a VCR engine powered by soybean biodiesel	Heat Transfer	2021-2022	ISSN: 2688-4542
8	Dr. A.M. Kate	Enhancement in Performance and Emission Characteristics of Soybean Biodiesel by using Sr-ZnO Nanoadditives in VCR Engine	International Journal of Thermal Energy and Applications	2021-2022	Not Available
9	Ayub A. Tamboli	Mechanical Characterization of Stacked Roselle Fibre Composites: Effect of Fibre Orientation	International Journal of Vehicle Structures & Systems	2021-2022	ISSN: 0975-3060
10	Aldar Bharat	Mechanical response of PTFE-based Nano composites	International Journal of Advance Research, Ideas and Innovations in Technology	2021-2022	ISSN: 2454-132X
11	Dr. Jagtap H. P.	Use of Analytic Hierarchy Process Methodology for Analyzing Existing Motorcycle Helmet Design Concepts	Select Proceedings of RAM 2021, Lecture Notes in Mechanical Engineering (LNME)	2021-2022	ISBN: 978-981-16-9952-8, Print ISSN: 2195-4356
12	Prof. Pitambar Gadhave	Investigative Study on Triplex Tube Heat Exchanger with Stearic Acid as Phase Change Material	The International Conference on Advanced Materials and Modern Manufacturing	2021-2022	ISBN: 978-981-19-0244-4
13	Dr. Ubale A. B.	Easy Chair Preprint	–	2021-2022	ISSN: 2395-0072

2020-21

Sr. No.	Title of Paper	Name of the Author(s)	Name of Journal	Year of Publication	ISSN Number
1	Prof. Gadhave P. S.	Selection of phase change material for domestic water heating using multi criteria decision approach	Australian Journal of Mechanical Engineering	2020-21	ISSN: 1448-4846
2	Prof. Gadhave P. S.	Comprehensive Review of Phase Change Material Based Latent Heat Thermal Energy Storage System	International Journal of Ambient Energy	2020-21	ISSN: 2162-8246
3	Prof. Magade P. B.	Structural Analysis of Novel Mini Horizontal Axis Wind Turbine (NMHAWT)	Techno-Societal 2020	2020-21	ISBN: 978-3-030-69925-3
4	Dr. Jagtap H. P.	Markov-based performance evaluation and availability optimization of the boiler–furnace system in coal-fired thermal power plant using PSO	Energy Reports	2020-21	ISSN: 2352-4847
5	Dr. A.M. Kate	Influence of silica Nano-additives on performance and emission characteristics of soybean biodiesel fuelled diesel engine	Energies	2020-21	ISSN: 1996-1073
6	Dr. A.M. Kate	Effect of Soybean biodiesel and Copper coated Zinc oxide Nanoparticles on Enhancement of Diesel Engine Characteristics	Energy Sources, Part A: Recovery, Utilization and Environmental Effects	2020-21	ISSN: 1556-7036, 1556-7230
7	Dr. A.M. Kate	Effect of zinc oxide Nano-additives and soybean biodiesel at varying loads and compression ratios on VCR diesel engine characteristics	Symmetry	2020-21	ISSN: 2073-8994
8	Dr. A.M. Kate	Experimental Investigation of An Aluminium Thermo syphon At Normal Operating Conditions	Journal of Thermal Engineering	2020-21	E-ISSN: 2148-7847
9	Adewar Shraddha Swapnil	Experimental Investigation And Optimization of Single Point Incremental Forming Process For Titanium	International Research Journal of Modernization in Engineering Technology and Science	2020-21	e-ISSN: 2582-5208
10	Totla Nilesh Balkishan	Determination of empirical correlation between OD and ID of liner of a multi cylinder diesel engine under mechanically distorted condition	Materials Today: Proceedings	2020-21	ISSN: 2504-477X
11	Shinde Harish Mohan	Evaluating petrol engine oil deterioration through oxidation and nitration parameters by low-cost IR sensor	Applied Petrochemical Research	2020-21	ISSN: 2190-5533
12	Shinde Harish Mohan	Viscosity Assessment for Quantifying Engine Oil Deterioration Using New Cost-effective and Handy Fluid Property Sensor	International Journal of Advanced Science and Technology	2020-21	ISSN: 2277-8691
13	Patil Suyog Subhash	Reliability analysis of a steam boiler system by expert judgment method and best-fit failure model method: a new approach	International Journal of Quality & Reliability Management	2020-21	ISSN: 0265-671X
14	Patil Suyog Subhash	Availability Analysis of a Steam Boiler in Textile Process Industries Using Failure and Repair Data: A Case Study	ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg	2020-21	ISSN: 2376-7642
15	Mr. Bhimrao A. Shivsharan	Modal Analysis with CFD and Experimental Validation of Horizontal Axis Mini Wind Turbine through FFT	Journal of Information and Computational Science	2020-21	ISSN: 1548-7741
16	Mr. Bhimrao A. Shivsharan	A Review Paper On Vehicle Mounted Wind Turbine	Journal of Seybold Report	2020-21	ISSN: 1533-9211
17	Mr. Bhimrao A. Shivsharan	Experimental design, development and testing of novel aluminum mini wind turbine	Materials Today: Proceedings	2020-21	ISSN: 2214-7853
18	Dr. Jagtap H. P.	Reliability analysis using condition monitoring approach in thermal power plants	Reliability Management and Engineering: Challenges and Future Trends	2020-21	ISBN: 978-0-367-21153-0
19	Dr. Jagtap H. P.	Application of particle swarm optimization method for availability optimization of thermal power plant	Nature Inspired Optimization in Advanced Manufacturing Processes and Systems under series AI in Engineering CRC Press	2020-21	ISBN: 9780367532604
20	Amol Ubale, Dilip Panghavhane, Parmeshwar Ritapure	Dynamic Modeling and Experimental Study of Forced Convection Evacuated Tube Solar Collector Used for Grape Dryer	Techno-Societal 2020	2020-21	ISBN: 978-3-030-69925-3
21	Parmeshwar P Ritapure, YR Kharde, Amol Ubale, B.D. Aldar	Effect Analysis of Process Parameters on Lubricated Sliding Wear of Al–25Zn–2Cu-2.5 Si Alloy for Plain Bearing Application	Techno-Societal 2020	2020-21	ISBN: 978-3-030-69925-3

Research Domain

Journal Publications

Book Chapter / Conference Publications

Research Domain

Journal Publications

Sr. No.	Paper Title	Authors	Journal	Year of Publication	ISSN Number	Link to the recognition in UGC enlistment of the Journal /Digital Object Identifier (doi) number
Sr. No.	Paper Title	Authors	Journal	Year of Publication	ISSN Number	Link to website of the Journal	Link to article / paper / abstract of the article	Is it listed in UGC Care list/Scopus/Web of Science/other, mention
1.	The effect of Sr-doped zinc oxide nanoadditives on the performance and emission parameters of a VCR engine powered by soybean biodiesel	Dr. A.M. Kate	Heat Transfer	2021-2022	ISSN:2688-4542	https://onlinelibrary.wiley.com/journal/26884542	https://doi.org/10.1002/htj.22556	Scopus
2.	Influence of silica nano-additives on performance and emission characteristics of soybean biodiesel fuelled diesel engine	Dr. A.M. Kate	Energies	2021-2022	ISSN 19961073	https://www.mdpi.com/journal/energies	https://doi.org/10.3390/en14051489	Scopus
3.	Optimization of dry sliding wear characteristics of Al-25Zn/SiC hybrid composites by graphite reinforcement using artificial neural network and Taguchi’s method,	Dr. Parmeshwar P Ritapure	Tribology – Materials, Surfaces & Interfaces	2021-2022	Print ISSN: 1751-5831 Online ISSN: 1751-584X	https://www.tandfonline.com/action/journalInformation?journalCode=ytrb20	https://doi.org/10.1080/17515831.2021.2002598	Scopus web of science
4.	Influence of SiC on solid particle erosion and mechanical behavior of Al-25Zn alloy based novel metal matrix composites fabricated through stir casting technique	Dr. Parmeshwar P Ritapure	Advances in Materials and Processing Technologies	2021-2022	Print ISSN: 2374-068X Online ISSN: 2374-0698	https://www.tandfonline.com/journals/tmpt20	https://doi.org/10.1080/2374068X.2021.1970987	Scopus web of science
5.	Pin temperature and Al2O3 fillings effect on sliding wear characteristics of Al25Zn/ Al2O3 composites	Dr. Parmeshwar P Ritapure	Part J: Journal of Engineering Tribology	2021-2022	ISSN: 1350-6501 Online ISSN: 2041-305X	https://journals.sagepub.com/journal-info/pij	https://doi.org/10.1177/13506501211025126	Scopus
6.	An integrated approach for interoperability of standards, condition monitoring methods, and research models used in the power generation sector	Dr. Parmeshwar P Ritapure	IOP Conference Series: Materials Science and Engineering 1166 (1), 012010	2021-2022	Online ISSN: 1757-899X Print ISSN: 1757-8981	https://iopscience.iop.org/journal/1757-899X	https://doi.org/10.1088/1757-899X/1166/1/012010	Scopus
7.	RAM analysis and availability optimization of thermal power plant water circulation system using PSO	Dr. Jagtap H. P.	Energy Reports journal	2021-2022	ISSN 2352-4847	https://www.journals.elsevier.com/energy-reports	https://doi.org/10.1016/j.egyr.2020.12.025	SCI
8.	Succinate assisted synthesis of magnetically separable Fe2O3/g-C3N4 nano-heterostructure: A stable catalyst for environmental remediation	Prof. Godase S. M.	Current Research in Green and Sustainable Chemistry Volume 4, 2021, 100210	2021-2022	ISSN 2666-0865	https://www.sciencedirect.com/journal/current-research-in-green-and-sustainable-chemistry	https://doi.org/10.1016/j.crgsc.2021.100210	Scopus
9.	Effect of Soybean biodiesel and Copper coated Zinc oxide Nanoparticles on Enhancement of Diesel Engine Characteristics	Dr. A.M. Kate	Energy Sources, Part A: Recovery, Utilization and Environmental Effects	2020-2021	ISSN 15567036, 15567230	https://www.tandfonline.com/doi/abs/10.1080/15567036.2020.1856237	https://doi.org/10.1080/15567036.2020.1856237	Scopus
10.	Effect of zinc oxide nano-additives and soybean biodiesel at varying loads and compression ratios on VCR diesel engine characteristics	Dr. A.M. Kate	Symmetry	2020-2021	ISSN 20738994	https://www.mdpi.com/2073-8994/12/6/1042	https://doi.org/10.3390/sym12061042	Scopus
11.	Novel concept of utilizing geometrically taper receiver and solar cycloidal concentrator system for enhancing efficiency of solar concentrating system	Dr. Kulkarni C.N.	Materials Today: Proceedings	2020-2021	2214-7853	https://www.journals.elsevier.com/materials-today-proceedings	https://doi.org/10.1016/j.matpr.2020.06.033	Scopus
12.	Performance analysis and availability optimization to improve maintenance schedule for a turbine-generator system of a coal-fired thermal power plant using Particle Swarm Optimization	Dr. Jagtap H. P.	Reliability Engineering and System Safety	2020-2021	0951-8320	https://www.journals.elsevier.com/reliability-engineering-and-system-safety	DOI: 10.1016/j.ress.2020.107130	SCI
13.	RAM analysis and availability optimization of thermal power plant water circulation system using PSO	Dr. Jagtap H. P.	Energy Reports	2020-2021	2352-4847	https://www.journals.elsevier.com/energy-reports	https://doi.org/10.1016/j.egyr.2020.12.025	SCI
14.	Markov-based performance evaluation and availability optimization of the boiler–furnace system in coal-fired thermal power plant using PSO	Dr. Jagtap H. P.	Energy Reports	2020-2021	2352-4847	https://doi.org/10.1016/j.egyr.2020.04.028	https://doi.org/10.1016/j.egyr.2020.04.028	SCI
15.	Selection of phase change material for domestic water heating using multi criteria decision approach	Prof. Gadhave P. S.	Australian Journal of Mechanical Engineering	2020-2021	1448-4846	https://www.tandfonline.com/toc/tmec20/current	https://doi.org/10.1080/14484846.2020.1842297	Scopus
16.	Comprehensive Review of Phase Change Material Based Latent Heat Thermal Energy Storage System	Prof. Gadhave P. S.	International Journal of Ambient Energy	2020-2021	0143-0750	https://www.tandfonline.com/toc/taen20/current	https://doi.org/10.1080/01430750.2021.1873848	Scopus
17.	Experimental design, development and testing of novel aluminum mini wind turbine	Prof. Magade P. B.	Materials Today: Proceedings	2020-2021	2214-7853	https://www.journals.elsevier.com/materials-today-proceedings	https://doi.org/10.1016/j.matpr.2020.09.106	Scopus
18.	A comparative study and graphical analysis in designing and operation of Solar Thermal circular concentrator for enhancing efficiency of solar concentrating system	Dr.Kulkarni C.N.	E3S Web of Conferences	2019-2020	ISSN 22671242	https://www.e3s-conferences.org/	https://doi.org/10.1051/e3sconf/202017001001	Scopus
19.	Study of Mechanical properties and erosion wear behaviour of novel Al-25Zn alloy/SiC/Graphite hybrid composites	Dr. Ritapure P. P.	Materials Today: Proceedings	2019-2020	2214-7853	https://www.journals.elsevier.com/materials-today-proceedings	https://doi.org/10.1016/j.matpr.2020.03.302	Scopus
20.	Failure analysis of induced draft fan used in a thermal power plant using coordinated condition monitoring approach: A case study	Dr. Jagtap H. P.	Engineering Failure Analysis	2019-2020	ISSN 13506307	https://www.sciencedirect.com/journal/engineering-failure-analysis	https://doi.org/10.1016/j.engfailanal.2020.104442	SCI
21.	Maintenance priority evaluation of turbine-generator components in a sub-critical coal-fired power Plant	Dr. Jagtap H. P.	Think India Journal	2019-2020	ISSN: 0971-1260	https://thinkindiaquarterly.org/index.php/think-india		UGC
22.	Markov-based performance evaluation and availability optimization of the boiler–furnace system in coal-fired thermal power plant using PSO	Dr. Jagtap H. P.	Energy Reports	2019-2020	ISSN 23524847	https://www.sciencedirect.com/journal/energy-reports	https://doi.org/10.1016/j.egyr.2020.04.028	SCI
23.	Evaluation of Mechanical, Microstructure and Sliding Wear Characteristics of Different Al-Zn Alloy and Composite: A Comparative Research	Dr. Ritapure P. P.	Materials Today: Proceedings	2019-2020	2214-7853	https://www.journals.elsevier.com/materials-today-proceedings	https://doi.org/10.1016/j.matpr.2019.07.329	Scopus
24.	Stress Analysis of Carbon Fiber Reinforced Composite Laminate with Different Centrally Located Cutouts	Pranija P. Bartere	Materials Today Proceedings Elseveir, 16(2019), 592-597	2019-2020	2214-7853	https://www.sciencedirect.com/journal/materials-today-proceedings	https://doi.org/10.1016/j.matpr.2019.05.133	Scopus
25.	Effect of novel flow divider type turbulators on fluid flow and heat transfer	Chandrakant L Prabhune	Thermal Science and Engineering Progress, 9 (2019),322-331	2018-2019	ISSN 24519049	https://www.sciencedirect.com/journal/thermal-science-and-engineering-progress	https://doi.org/10.1016/j.tsep.2018.12.004	Scopus
26.	SiC contents and pin temperature effect on tribological properties of Al25Zn/SiC composites	Parmeshwar P Ritapure	International Journal of Refractory Metals & Hard Materials 82 (2019) 234–244	2018-2019	ISSN 02634368, 09580611, 22133917	https://www.sciencedirect.com/journal/international-journal-of-refractory-metals-and-hard-materials	https://doi.org/10.1016/j.ijrmhm.2019.04.013	Scopus/SCI
27.	Study of mechanical and sliding wear behavior of Al-25Zn alloy/SiC/Graphite novel hybrid composites for plain bearing application	Parmeshwar P Ritapure	Tribology in industry 41(3) (2019)375-38	2018-2019	ISSN: 0354-8996	https://www.tribology.rs/index.html	DOI: 10.24874/ti.2019.41.03.07	Scopus
28.	Stress Analysis of Carbon Fiber Reinforced Composite Laminate with Different Centrally Located Cutouts	Abhijit M Kasar	Materials Today Proceedings Elseveir, 16(2019), 592-597	2018-2019	2214-7853	https://www.sciencedirect.com/journal/materials-today-proceedings	https://doi.org/10.1016/j.matpr.2019.05.133	Scopus
29.	Experimental Investigation Of An Aluminium Thermosyphon At Normal Operating Conditions	Mutalikdesai Sachin V., A. M. Kate	Journal of Thermal Engineering	2018-2019	ISSN: 2148-7847	https://jten.yildiz.edu.tr/	DOI: 10.18186/thermal.797291	Scopus
30.	CFD Simulation of In Cylinder Gases of Multicylinder Diesel Engine for Estimation of Liner Temperature from Gas Side	C. L. Prabhune	International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075, Volume-8 Issue-8S3, June 2019	2018-2019	ISSN 22783075	https://www.ijitee.org/	https://www.ijitee.org/wp-content/uploads/papers/v8i8s3/H10140688S319.pdf	Scopus
31.	Thermal Power Plant Condenser Fault Diagnosis Using Coordinated Condition Monitoring Approach	Hanumant P. Jagtap	Instrumentation Mesure Métrologie Journal, Vol. 18, No. 3, June, 2019, pp. 223-235	2018-2019	ISSN 16314670	https://www.iieta.org/Journals/I2M	https://doi.org/10.18280/i2m.180301	Scopus
32.	“Simulation of Rocket Stove Geometrical Aspects for its performance improvement”	Gandigude A.U.	Journal of Material Today: Proceeding 5 (2) (2018) 3903-3908(Scopus).	2017-18	2214-7853	https://www.journals.elsevier.com/materials-today-proceedings	https://doi.org/10.1016/j.matpr.2017.11.645	Scopus
33.	A Review of Performance Evolution for Biomass Cook-stove Models	Gandigude A.U.	Material Today Proceeding, Elsevier	2017-18	2214-7853	https://www.journals.elsevier.com/materials-today-proceedings		Scopus
34.	Review of Rocket Cook-Stove Geometrical Aspects for its Performance Improvement	Gandigude A.U.	Material Today Proceeding, Elsevier	2017-18	2214-7853	https://www.journals.elsevier.com/materials-today-proceedings	https://doi.org/10.1016/j.matpr.2017.12.047	Scopus
35.	Design and Manufacturing of Portal Axle Gear Box	Lakhan Mali	International Research Journal of Engineering and Technology (IRJET)	2017-18	ISSN: 2395 -0056	https://www.irjet.net/	https://www.irjet.net/archives/V4/i4/IRJET-V4I4343.pdf	Scopus
36.	Performance Evaluation of Solar Parabolic Trough Collector Using Two Fluids Water and Ethylene Glycol	Prof. Patil K.S.	National Conference Recent Innovations in Science and Engineering (NC-RISE 17) ISSN: 2321-8169 Volume: 5 Issue: 9	2017-18	ISSN: 2321-8169	https://ijritcc.org/index.php/ijritcc	https://ijritcc.org/download/conferences/NC-RISE_17/Track_4_(MECH)/1506757500_30-09-2017.pdf	Scopus
37.	Intra-Laminar Fracture toughness of Glass Fiber Reinforced polymar by Experimentation and FEA	Prof. Tanpure K. S.	IOP Conference Series: Materials Science and Engineering	2017-18	ISSN: 1757-899X	https://iopscience.iop.org/article/10.1088/1757-899X/346/1/012070/meta	https://iopscience.iop.org/article/10.1088/1757-899X/346/1/012070/meta	Scopus

Book Chapter / Conference Publications

Sr. No.	Name of the teacher	Title of the book/chapters published	Title of the paper	Title of the proceedings of the conference	Name of the conference	National / International	Year of publication	ISBN number of the proceeding	Name of the publisher
1.	Dr. Jagtap H. P.	Recent Advances in Manufacturing Modelling and Optimization Select Proceedings of RAM 2021 Part of the book series: Lecture Notes in Mechanical Engineering (LNME)	Use of Analytic Hierarchy Process Methodology for Analyzing Existing Motorcycle Helmet Design Concepts	Select Proceedings of RAM 2021 Lecture Notes in Mechanical Engineering (LNME)	–	International	2021-2022	ISBN: 978-981-16-9952-8 Print ISSN2195-4356	Springer, Singapore
2.	Pitambar Gadhave	Recent Advances in Materials and Modern Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Singapore	Investigative Study on Triplex Tube Heat Exchanger with Stearic Acid as Phase Change Material	The International Conference on Advanced Materials and Modern Manufacturing	–	International	2021-2022	ISBN978-981-19-0244-4	Springer, Singapore
3.	Dr. Ubale A. B.	Experimental and FEA of Optimized Existing Lower Control Arm	EasyChair Preprint	–	–	International	2021-2022	ISSN: 2395-0072	EasyChair Preprint
4.	Amol Ubale, Parmeshwar Ritapure	Techno-Societal 2020	Dynamic Modeling and Experimental Study of Forced Convection Evacuated Tube Solar Collector Used for Grape Dryer	International Conference on Advanced Technologies for Societal Applications	–	International	2020-2021	ISBN: 978-3-030-69925-3	Springer
5.	Parmeshwar P Ritapure, Amol Ubale, B.D. Aldar	Techno-Societal 2020	Effect Analysis of Process Parameters on Lubricated Sliding Wear of Al–25Zn–2Cu-2.5 Si Alloy for Plain Bearing Application	Proceedings of the 3rd International Conference on Advanced Technologies for Societal Applications—Volume 2	–	International	2020-2021	ISBN: 978-3-030-69925-3	Springer
6.	Dr. Jagtap H. P.	Reliability Management and Engineering: Challenges and Future Trends	Reliability analysis using condition monitoring approach in thermal power plants	Proceedings of the 3rd International Conference on Advanced Technologies for Societal Applications—Volume 2	–	International	2020-2021	978-0-367-21153-0	CRC Press Taylor and Francis Group
7.	Dr. Jagtap H. P.	Nature Inspired Optimization in Advanced Manufacturing Processes and Systems under series AI in Engineering CRC Press	Application of particle swarm optimization method for availability optimization of thermal power plant	Proceedings of the 3rd International Conference on Advanced Technologies for Societal Applications—Volume 2	–	International	2020-2021	ISBN 9780367532604	CRC Press
8.	Rajan K Petkar	Advances in Mechanical Engineering	Investigation of Thermal Desalination System Using Heat Recovery	Part of the Lecture Notes in Mechanical Engineering book series (LNME)	–	International	2020-2021	ISBN978-981-15-3639-7	Springer
9.	Prof. Magade P. B.	Techno-Societal 2020	Structural analysis of novel mini horizontal axis wind turbine (NMHAWT),” Springer International Publishing AG 2020, Techno-Societal 2020.	Part of the Lecture Notes in Mechanical Engineering book series (LNME)	–	International	2020-2021	ISBN978-3-030-69921-5	Springer
10.	Dr. Jagtap H. P.	Reliability, Safety and Hazard Assessment for Risk-Based Technologies, Lecture Notes in Mechanical Engineering (Springer Publications)	Markov probabilistic approach-based availability simulation modeling and performance evaluation of coal supply system of the thermal power plant, Reliability, Safety and Hazard Assessment for Risk-Based Technologies	Part of the Lecture Notes in Mechanical Engineering book series (LNME)	–	International	2019-2020	ISBN: 978-981-13-9008-1	Springer
11.	Dr. Jagtap H. P.	AI Techniques for Reliability Prediction for Electronic Components (Book chapter)	Traditional and non-traditional optimization techniques to enhance reliability in process industries	Part of the Lecture Notes in Mechanical Engineering book series (LNME)	–	International	2019-2020	ISBN13: 9781799814641	igi-global
12.	Pramod Magade	Development and Testing of Novel Small Wind Turbine (NSWT) Set	Springer International Publishing, ISBN 978-3-030-16848-3, 2018.	Techno-Societal 2018	–	International	2019-2020	ISBN978-3-030-16848-3	Springer
13.	Chandrakant L Prabhune	Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018). Singapore.	Development of 12 Channel Temperature Acquisition System for Heat Exchanger Using MAX6675 and Arduino Interface	Lecture Notes in Mechanical Engineering. Springer, Singapore.	–	International	2019-2020	ISBN978-981-13-2697-4	Springer
14.	Parmeshwar P Ritapure,	Effect of Graphite Addition on Mechanical Properties and Elevated Temperature Tribological Behaviour of Aluminium.Zinc Alloy	Effect of Graphite Addition on Mechanical Properties and Elevated Temperature Tribological Behaviour of Aluminium.Zinc Alloy	Proceedings of TRIBOINDIA-2018 An International Conference on Tribology	International Conference on Tribology, TRIBOINDIA-2018 organized by VJTI Mumbai and Tribology society of India	International	2019-2020	https://dx.doi.org/10.2139/ssrn.3332400	–
15.	Ajit M. Kate	–	Design and Implementation of Ecofriendly vehicle and its Impact on Environment	Proceedings of the International Conference on Communication and Electronics Systems (ICCES 2018)	International Conference on Communication and Electronics Systems	International	2018-2019	https://www.researchgate.net/profile/Prashant-Kumar-14/publication/333501469_Design_and_Implementation_of_Ecofriendly_vehicle_and_its_Impact_on_Environment/links/5f66d48492851c14bc8951b3/Design-and-Implementation-of-Ecofriendly-vehicle-and-its-Impact-on-Environment.pdf	IEEE Conference

ZEAL COLLEGE OF ENGINEERING & RESEARCH, PUNE

Mechanical Engineering

Zeal TVC

Contact Us

Quick Reference

Useful Links

Find Us On Map